PRODUCT
Nuclear Instruments
Section One .Laboratory Radiation Measuring Instruments Section Two.Portable Style Radiation Detection Instrument Section Three.Radioactive contamination monitor Section Four.Radioactive waste measurements Section Five.Underwater Radioactivity Measuring Device Section Six.Area Radiation Measurement Section Seven.Tritium Air Monitors
HOME > PRODUCT > Scintillation detector > NaI(TI) scintillation detector
3×3 NaI(TI) scintillation detector
Place of origin:China Type:76B76/3M-E2
Product details


VS-0013-2.png

Description : NaI(Tl) scintillation detector

Scintillation crystal : NaI(Tl), Ø76x76 mm.

Drawing : VS-0013-30.

Crystal read out :Ø76 mm, ETL 9305.

Dimensions : Length : 258 mm.

                    Diameter : 59 mm.

Electronics : 50 Ω buffer amplifier.

Connections : High voltage      SHV.

                      Signal               BNC.

                      Preamp power   LEMO 0S 302CLL.

Power requirements : ± 12V

Resistor chain : 5.6 MΩ

Temperature range :  -20 °C to +70 °C.

 

Performance

Output impedance :50Ω

Output pulse polarity : Positive.

Pulse rise time : Approx. 0.5 µs.

Pulse fall time : 50 µs positive.

Maximum signal height:± 10V

Energy resolution :  < 7.5% FWHM @ 662 keV

Gain stability : < 1% over 24 hours at 20 °C

Typical High Voltage : 600 to 800 V


Copyright ? 2018 Beijing Tai Kun Industrial Equipment CO.,Ltd. 版权所有 京ICP备12018226号 Legal declaration Powered by lc787
Pay attention to us